科目：物理 Physics (9702)
年份：2012 夏季
试卷：Paper 43
总页数：20
章节：12-13: Circular Motion & Gravitational Fields, 14-16: Temperature, Ideal Gases & Thermodynamics, 17: Oscillations, 18: Electric fields, 19: Capacitance, 20: Magnetic fields, 21: Alternating currents, 22: Quantum physics, 23: Nuclear physics, 24: Medical physics
4
Section A
Answer all the questions in the spaces provided.
For Examiner's Use
1 (a) Define gravitational potential at a point.
........................................................................................................................... [1]
(b) The gravitational potential $\phi$ at distance $r$ from point mass $M$ is given by the expression
$$
\phi = -\frac{GM}{r}
$$
where $G$ is the gravitational constant.
Explain the significance of the negative sign in this expression.
...........................................................................................................................
........................................................................................................................... [2]
(c) A spherical planet may be assumed to be5
(d) The planet in (c) has mass $M$ and diameter $6.8 \times 10^3$ km. The product $GM$ for this planet is $4.3 \times 10^{13} \, \text{N} \, \text{m}^2 \, \text{kg}^{-1}$ .
A rock, initially at rest a long distance from the planet, accelerates towards the planet. Assuming that the planet has negligible atmosphere, calculate the speed of the rock as it hits the surface of the planet.
speed = ……………………………… ms⁻¹ [3]
For Examiner’s Use
© UCLES 2012 9702/43/M/J/12 [Turn over6 2 (a) The kinetic theory of gases is based on some simplifying assumptions. The molecules of the gas are assumed to behave as hard elastic identical spheres. State the assumption about ideal gas molecules based on (i) the nature of their movement, ................................................................................................................... [1] (ii) their volume. ................................................................................................................... [2] For Examiner’s Use © UCLES 2012 9702/43/M/J/12
7
(b) A cube of volume $V$ contains $N$ molecules of an ideal gas. Each molecule has a component $c_x$ of velocity normal to one side $S$ of the cube, as shown in Fig. 2.1.
<div style="text-align: center;">
<br/>
Fig. 2.1
</div>
The pressure $p$ of the gas due to the component $c_x$ of velocity is given by the expression
$$
pV = Nm c_x^2
$$
where $m$ is the mass of a molecule.
Explain how the expression leads to the relation
$$
pV = \frac{1}{3} Nm <c^2>
$$
where $<c^2>$ is the mean square speed of the molecules.
[3]
(c) The molecules of an ideal gas have a root-mean-square (r.m.s.) speed of $520 \, \text{m} \, \text{s}^{-1}$ at a temperature of $27^\circ \text{C}$ .
Calculate the r.m.s. speed of the molecules at a temperature of $100^\circ \text{C}$ .8
3 (a) Define specific latent heat.
...............................................................................................................................
...............................................................................................................................
............................................................................................................................... [2]
(b) The heater in an electric kettle has a power of 2.40 kW.
When the water in the kettle is boiling at a steady rate, the mass of water evaporated in 2.0 minutes is 106 g.
The specific latent heat of vaporisation of water is $2260 \, \text{J} \, \text{g}^{-1}$ .
Calculate the rate of loss of thermal energy to the surroundings of the kettle during the boiling pro9
4 A small metal ball is suspended from a fixed point by means of a string, as shown in Fig. 4.1.
For Examiner's Use
Fig. 4.1
The ball is pulled a small distance to one side and then released. The variation with time $t$ of the horizontal displacement $x$ of the ball is shown in Fig. 4.2.
Fig. 4.2
The motion of the ball is simple harmonic.
(a) Use data from Fig. 4.2 to determine the horizontal acceleration of the ball for a displacement $x$ of 2.0 cm.
acceleration = ……………………………… $m\,s^{-2}$ [3]
© UCLES 2012 9702/43/M/J/12 [Turn over10 (b) The maximum kinetic energy of the ball is $E_K$ . On the axes of Fig. 4.3, sketch a graph to show the variation with time $t$ of the kinetic energy of the ball for the first 1.0 s of its motion. <div style="text-align: center;">  <br/> Fig. 4.3 </div> [3] For Examiner’s Use © UCLES 2012 9702/43/M/J/12
11
5 (a) Define electric field strength.
........................................................................................................................... [1]
(b) An isolated metal sphere is to be used to store charge at high potential. The charge stored may be assumed to be a point charge at the centre of the sphere. The sphere has a radius of 25 cm. Electrical breakdown (a spark) occurs in the air surrounding the sphere when the electric field strength at the surface of the sphere exceeds $1.8 \times 10^4 \, \text{V cm}^{-1}$ .
(i) Show that the maximum charge that can be stored on the sphere is $12.5 \, \mu\text{C}$ .
[2]
(ii) Calculate the potential of the sphere for this maximum charge.
potential = ........................................... V [2]
For Examiner’s Use
12
6 A sinusoidal alternating voltage supply is connected to a bridge rectifier consisting of four ideal diodes. The output of the rectifier is connected to a resistor R and a capacitor C as shown in Fig. 6.1.
<div style="text-align: center;">
</div>
Fig. 6.1
The function of C is to provide some smoothing to the potential difference across R. The variation with time $t$ of the potential difference $V$ across the resistor R is shown in Fig. 6.2.
<div style="text-align: center;">
</div>
Fig. 6.2
(a) Use Fig. 6.2 to determine, for the alternating supply,
(i) the peak voltage,
$$
\text{peak voltage} = \underline{\hspace{5cm}} \text{ V [1]}
$$
(ii) the root-mean-square (r.m.s.) voltage,
$$
\text{r.m.s. voltage} = \underline{\hspace{13
(iii) the frequency. Show your working.
frequency = ……………………………… Hz [2]
(b) The capacitor C has capacitance $5.0 \, \mu\text{F}$ .
For a single discharge of the capacitor through the resistor R, use Fig. 6.2 to
(i) determine the change in potential difference,
change = ……………………………… V [1]
(ii) determine the change in charge on each plate of the capacitor,
change = ……………………………… C [2]
(iii) show that the average current in the resistor is $1.1 \times 10^{-3} \, \text{A}$ .
[2]
© UCLES 2012 9702/43/M/J/12 [Turn over
For Examiner’s Use
Note: The vertical text "For Examiner’s Use" is placed on the right side of the page as per the image. The page number "13" is at the top center. The footer contains copyright and document identifiers. The instruction at the bottom is a note about14
(c) Use Fig. 6.2 and the value of the current given in (b)(iii) to estimate the resistance of resistor R.
$$
\text{resistance} = \underline{\hspace{5cm}} \, \Omega \, [2]
$$
For Examiner’s Use
© UCLES 2012 9702/43/M/J/1215 7 Two long straight parallel copper wires A and B are clamped vertically. The wires pass through holes in a horizontal sheet of card PQRS, as shown in Fig. 7.1. For Examiner's Use  Fig. 7.1 (a) There is a current in wire A in the direction shown on Fig. 7.1. On Fig. 7.1, draw four field lines in the plane PQRS to represent the magnetic field due to the current in wire A. [3] (b) A direct current is now passed through wire B in the same direction as that in wire A. The current in wire B is larger than the current in wire A. (i) On Fig. 7.1, draw an arrow in the plane PQRS to show the direction of the force on wire B due to the magnetic field produced by the current in wire A. [1] (ii) Wire A also experiences a force. State and explain which wire, if a
16 8 (a) Explain what is meant by a *photon*. ............................................................................................................................... ............................................................................................................................... ............................................................................................................................... ............................................................................................................................... [3] (b) An emission spectrum is seen as a series of differently coloured lines on a black background. Suggest how this observation provides evidence for discrete electron energy levels in atoms. .......................................
17
9 (a) (i) State what is meant by the decay constant of a radioactive isotope.
...............................................................................................................................
...............................................................................................................................
............................................................................................................................... [2]
(ii) Show that the decay constant $\lambda$ and the half-life $t_{\frac{1}{2}}$ of an isotope are related by the expression
$$
\lambda t_{\frac{1}{2}} = 0.693.
$$
[3]
(b) In order to determine the half-life of a sample of a radioactive isotope, a student measures the count rate near to the sample, as illustrated in Fig. 918 Initially, the measured count rate is 538 per minute. After a time of 8.0 hours, the measured count rate is 228 per minute. Use these data to estimate the half-life of the isotope. half-life = ……………………………… hours [3] (c) The accepted value of the half-life of the isotope in (b) is 5.8 hours. The difference between this value for the half-life and that calculated in (b) cannot be explained by reference to faulty equipment. Suggest two possible reasons for this difference. 1. ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… 2. ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… [2] For Examiner’s Use © UCLES 2012 9702/43/M/J/12
19 Section B Answer all the questions in the spaces provided. For Examiner's Use 10 A student designs an electronic sensor that is to be used to switch on a lamp when the light intensity is low. Part of the circuit is shown in Fig. 10.1. <!-- Image: Circuit diagram with components labeled +5V, X, +5V, -5V, ~240V, sensing device, processing unit, output device --> Fig. 10.1 (a) State the name of the component labelled X on Fig. 10.1. ........................................................................................................................... [1] (b) On Fig. 10.1, draw the symbols for (i) two resistors to complete the circuit for the sensing device, [2] (ii) a relay to complete the circuit for the processing unit. [2] (c) (i) State the purpose of the relay. .......
20
11 High-speed electrons are incident on a metal target. The spectrum of the emitted X-ray radiation is shown in Fig. 11.1.
<div style="text-align: center;">
<br/>
Fig. 11.1
</div>
(a) Explain why
(i) there is a continuous distribution of wavelengths,
...............................................................................................................................
...............................................................................................................................
............................................................................................................................... [2]
(ii) there is a sharp cut-off at short wavelength.
................................................................21 (c) (i) Suggest why, when producing an X-ray image, long-wavelength X-ray radiation poses a greater hazard to health than short-wavelength radiation. ................................................................................................................... [1] (ii) Suggest how this hazard is minimised. ................................................................................................................... [1] For Examiner’s Use © UCLES 2012 9702/43/M/J/12 [Turn over
22 12 A person is to be investigated using a magnetic resonance (MR) scanner. (a) This technique involves the use of two superimposed magnetic fields. Describe the functions of these two magnetic fields. ............................................................................................................................ ............................................................................................................................ ............................................................................................................................ ............................................................................................................................ ...................................................................................
23 13 (a) In a mobile phone system, the area covered by the system is divided into a number of cells. For this system, explain why (i) neighbouring cells use different carrier frequencies, ................................................................................................................... [1] (ii) each cell has a limited area, even in sparsely populated regions. ................................................................................................................... [1] (b) A mobile phone handset is left switched on. Explain why, although a call is not being made, the computer at the cellular exchange is still operating for this phone. ...................................................................................................................