科目：物理 Physics (9702)
年份：2014 夏季
试卷：Paper 43
总页数：24
章节：12-13: Circular Motion & Gravitational Fields, 14-16: Temperature, Ideal Gases & Thermodynamics, 17: Oscillations, 18: Electric fields, 19: Capacitance, 20: Magnetic fields, 21: Alternating currents, 22: Quantum physics, 23: Nuclear physics, 24: Medical physics
4 Section A Answer all the questions in the spaces provided. 1 (a) Define gravitational potential at a point. ............................................................................................................................... ............................................................................................................................... ............................................................................................................................... [2] (b) A stone of mass $m$ has gravitational potential energy $E_p$ at a point $X$ in a gravitational field. The magnitude of the gravitational potential at $X$ is $\phi$ . State the relation between $m$ , $E_p$ and $\phi$ . .......................................................................
5
2 (a) Explain what is meant by the Avogadro constant.
...............................................................................................................................
...............................................................................................................................
............................................................................................................................... [2]
(b) Argon-40 ( $^{40}_{18}\text{Ar}$ ) may be assumed to be an ideal gas.
A mass of 3.2g of argon-40 has a volume of 210cm³ at a temperature of 37°C.
Determine, for this mass of argon-40 gas,
(i) the amount, in mol,
amount = ................................................... mol [1]
(ii) the pressure,
pressure = ............................6 BLANK PAGE © UCLES 2014 9702/43/M/J/14
7
3 The volume of 1.00 kg of water in the liquid state at 100°C is $1.00 \times 10^{-3} \, \text{m}^3$ . The volume of 1.00 kg of water vapour at 100°C and atmospheric pressure $1.01 \times 10^5 \, \text{Pa}$ is $1.69 \, \text{m}^3$ .
(a) Show that the work done against the atmosphere when 1.00 kg of liquid water becomes water vapour is $1.71 \times 10^5 \, \text{J}$ .
[2]
(b) (i) The first law of thermodynamics may be given by the expression
$$
\Delta U = + q + w
$$
where $\Delta U$ is the increase in internal energy of the system.
State what is meant by
1. $+ q$ .
................................................................................................................... [1]
2. $+ w$ .
.....................................................................................8 4 A student investigates the energy changes of a mass oscillating on a vertical spring, as shown in Fig. 4.1. Fig. 4.1 The student draws a graph of the variation with displacement $x$ of energy $E$ of the oscillation, as shown in Fig. 4.2. Fig. 4.2 (a) State whether the energy $E$ represents the total energy, the potential energy or the kinetic energy of the oscillations. ........................................................................................................................... [1] © UCLES 2014 9702/43/M/J/14
9
(b) The student repeats the investigation but with a smaller amplitude. The maximum value of $E$ is now found to be $1.8\,\text{mJ}$ .
Use Fig. 4.2 to determine the change in the amplitude. Explain your working.
change in amplitude = ……………………………………… cm [3]
© UCLES 2014 9702/43/M/J/14 [Turn over10 5 An isolated solid metal sphere of radius $r$ is given a positive charge. The distance from the centre of the sphere is $x$. (a) The electric potential at the surface of the sphere is $V_0$. On the axes of Fig. 5.1, sketch a graph to show the variation with distance $x$ of the electric potential due to the charged sphere, for values of $x$ from $x = 0$ to $x = 4r$. <div style="text-align: center;">  <br/> Fig. 5.1 <br/> [3] </div> © UCLES 2014 9702/43/M/J/14
11 (b) The electric field strength at the surface of the sphere is $E_0$. On the axes of Fig. 5.2, sketch a graph to show the variation with distance $x$ of the electric field strength due to the charged sphere, for values of $x$ from $x = 0$ to $x = 4r$. <div style="text-align: center;">  <br/> Fig. 5.2 <br/> [3] </div> © UCLES 2014 9702/43/M/J/14 [Turn over
12 6 An uncharged capacitor is connected in series with a battery, a switch and a resistor, as shown in Fig. 6.1. Fig. 6.1 The battery has e.m.f. 9.0 V and negligible internal resistance. The capacitance of the capacitor is 4700 $\mu$ F. The switch is closed at time $t = 0$ . During the time interval $t = 0$ to $t = 4.0$ s, the charge passing through the resistor is 22 mC. (a) (i) Calculate the energy transfer in the battery during the time interval $t = 0$ to $t = 4.0$ s. energy transfer = ………………………………………… J [2] (ii) Determine, for the capacitor at time $t = 4.0$ s, 1. the potential difference $V$ across the capacitor, $V$ = ………………………………………… V [2] © UCLES 2014 9702/43/M/J/14
13 2. the energy stored in the capacitor. energy = ………………………………………… J [2] (b) Suggest why your answers in (a)(i) and (a)(ii) part 2 are different. ……………………………………………………………………………………………………… [1] © UCLES 2014 9702/43/M/J/14 [Turn over
14 7 A solenoid is connected in series with a battery and a switch. A Hall probe is placed close to one end of the solenoid, as illustrated in Fig. 7.1.  Fig. 7.1 The current in the solenoid is switched on. The Hall probe is adjusted in position to give the maximum reading. The current is then switched off. (a) The current in the solenoid is now switched on again. Several seconds later, it is switched off. The Hall probe is not moved. On the axes of Fig. 7.2, sketch a graph to show the variation with time $t$ of the Hall voltage $V_H$.  Fig. 7.2 [3] © UCLES 2014 9702/43/M/J/14
15 (b) The Hall probe is now replaced by a small coil. The plane of the coil is parallel to the end of the solenoid. (i) State Faraday’s law of electromagnetic induction. ............................................................................................................................... ............................................................................................................................... ............................................................................................................................... [2] (ii) On the axes of Fig. 7.3, sketch a graph to show the variation with time $t$ of the e.m.f. $E$ induced in the coil when the current in the solenoid is switched on and then switched off. <div style="text-align: center;"> ![image]
16
8 (a) State what is meant by *quantisation* of charge.
............................................................................................................................ [1]
(b) A student carries out an experiment to determine the elementary charge.
A charged oil drop is positioned between two horizontal metal plates, as shown in Fig. 8.1.
<div style="text-align: center;">
<br/>
Fig. 8.1
</div>
The plates are separated by a distance of 7.0 mm. The lower plate is earthed.
The potential of the upper plate is gradually increased until the drop is held stationary. The potential for the drop to be stationary is 680 V.
The weight of the oil drop, allowing for the upthrust of the air, is $4.8 \times 10^{-14}$ N.
Calculate the value for the cha17
(c) The student repeats the experiment and determines the following values for the charge on oil drops.
$3.3 \times 10^{-19} \, \text{C} \quad 4.9 \times 10^{-19} \, \text{C} \quad 9.7 \times 10^{-19} \, \text{C} \quad 3.4 \times 10^{-19} \, \text{C}$
Use these values to suggest a value for the elementary charge. Explain your working.
elementary charge = ………………………………………… C [2]
© UCLES 2014 9702/43/M/J/14 [Turn over18 9 For a particular metal surface, it is observed that there is a minimum frequency of light below which photoelectric emission does not occur. This observation provides evidence for a particulate nature of electromagnetic radiation. (a) State three further observations from photoelectric emission that provide evidence for a particulate nature of electromagnetic radiation. 1. ............................................................................................................................... 2. ............................................................................................................................... 3. ............................................................................................................................... [3] (b) Some data for
19 (ii) Use Fig. 9.1 to determine 1. the threshold frequency, threshold frequency = ………………………………………… Hz [1] 2. the work function energy, in eV, of the metal surface. work function energy = ………………………………………… eV [3] © UCLES 2014 9702/43/M/J/14 [Turn over
20
10 (a) Explain what is meant by the *binding energy* of a nucleus.
...............................................................................................................................
...............................................................................................................................
............................................................................................................................... [2]
(b) Data for the masses of some particles are given in Fig. 10.1.
<table>
<tr>
<td></td>
<td>mass / u</td>
</tr>
<tr>
<td>proton</td>
<td>1.00728</td>
</tr>
<tr>
<td>neutron</td>
<td>1.00867</td>
</tr>
<tr>
<td>tritium ( $^3_1H$ ) nucleus</td>
<td>3.01551</td>
</tr>
<tr>
<td>poloni21
(c) One possible fission reaction is
$$
{}^{235}_{92}\text{U} + {}^1_0\text{n} \rightarrow {}^{141}_{58}\text{Ba} + {}^{92}_{36}\text{Kr} + 3\,{}^1_0\text{n}.
$$
By reference to binding energy, explain, without any calculation, why this fission reaction is energetically possible.
...............................................................................................................................
...............................................................................................................................
............................................................................................................................... [2]
© UCLES 2014 9702/43/M/J/14 [Turn over22 Section B Answer all the questions in the spaces provided. 11 (a) A circuit incorporating an ideal operational amplifier (op-amp) is shown in Fig. 11.1. Fig. 11.1 (i) State the name of this circuit. ........................................................................................................................... [1] (ii) Explain why the point P is referred to as a virtual earth. ........................................................................................................................... ........................................................................................................................... ........................................................................................................................... [3] (b) The circuit of
23
The voltmeter has infinite resistance and its full-scale deflection is 1.0V.
The input potential to the circuit is $V_{IN}$ .
The switch position may be changed in order to have different values of resistance in the circuit.
(i) The input potential $V_{IN}$ and the switch position are varied.
For each switch position, the reading of the voltmeter is 1.0V.
Complete Fig. 11.3 for the switch positions shown.
<table>
<tr>
<th>switch position</th>
<th> $V_{IN}/mV$ </th>
<th>resistance</th>
</tr>
<tr>
<td>A</td>
<td>10</td>
<td> $R_A = \underline{\hspace{5cm}}$ </td>
</tr>
<tr>
<td>B</td>
<td>100</td>
<td> $R_B = \underline{\hspace{5cm}}$ </td>
</tr>
<tr>
<td>C</td>
<td> $\underline{\hspace{5cm}}$ </td>
<td> $R_C = 1.0k\24 12 (a) Outline briefly the principles of CT scanning. ............................................................................................................................... ............................................................................................................................... ............................................................................................................................... ............................................................................................................................... ............................................................................................................................... ................................................................................................
25
(b) In a model for CT scanning, a section is divided into four voxels. The pixel numbers $P$, $Q$, $R$ and $S$ of the voxels are shown in Fig. 12.1.
$\begin{array}{ccc}
& D_3 & \\
& \downarrow & \\
D_2 & & D_4 \\
& \swarrow & \\
D_1 & & \\
\end{array}$
<table>
<tr>
<td> $P$ </td>
<td> $Q$ </td>
</tr>
<tr>
<td> $S$ </td>
<td> $R$ </td>
</tr>
</table>
Fig. 12.1
The section is viewed from the four directions $D_1$, $D_2$, $D_3$ and $D_4$.
The detector readings for each direction are noted.
The detector readings are summed as shown in Fig. 12.2.
<table>
<tr>
<td>49</td>
<td>61</td>
</tr>
<tr>
<td>73</td>
<td>55</td>
</tr>
</table>
Fig. 12.2
The background reading is 34.
Determine the pixel numbers $P$, $Q$, $R$ and $S$ as shown 26
13 The signal from a microphone is to be transmitted in digital form. A block diagram of part of the transmission system is shown in Fig. 13.1.
$\text{I} \rightarrow \text{[transmitter symbol]} \rightarrow \text{ADC} \rightarrow \text{parallel-to-serial converter} \rightarrow \text{---}$
Fig. 13.1
(a) Suggest two advantages of the transmission of a signal in digital form rather than in analogue form.
1. ...............................................................................................................................
2. ...............................................................................................................................
[2]
(b) State the function of the parallel-to-serial converter.
..........................................................27
14 (a) State what is meant by the *attenuation* of a signal.
............................................................................................................................ [1]
(b) A transmission cable has a length of 30 km. The attenuation per unit length of the cable is $2.4 \, \text{dB} \, \text{km}^{-1}$ .
Calculate, for a signal being transmitted along the cable,
(i) the total attenuation, in dB,
$$
\text{attenuation} = \underline{\hspace{5cm}} \, \text{dB} \, [1]
$$
(ii) the ratio
$$
\frac{\text{input power of signal}}{\text{output power of signal}}
$$
$$
\text{ratio} = \underline{\hspace{5cm}} \, [3]
$$
(c) By reference to your answers in (b), suggest why the attenuation of transmitted signals is usually expressed in dB.
...................................