科目：物理 Physics (9702)
年份：2022 夏季
试卷：Paper 41
总页数：20
章节：12-13: Circular Motion & Gravitational Fields, 14-16: Temperature, Ideal Gases & Thermodynamics, 17: Oscillations, 18: Electric fields, 19: Capacitance, 20: Magnetic fields, 21: Alternating currents, 22: Quantum physics, 23: Nuclear physics, 24: Medical physics, 25: Astronomy and cosmology
4
1 (a) (i) State Newton’s law of gravitation.
...............................................................................................................................
...............................................................................................................................
............................................................................................................................... [2]
(ii) Use Newton’s law of gravitation to show that the gravitational field strength $g$ at a distance $r$ away from a point mass $M$ is given by
$$
g = \frac{GM}{r^2}.
$$
[2]
(b) The Earth has a mass of $5.98 \times 10^{24} \, \text{kg}$ and a radius of $6.37 \times 10^6 \, \text{m}$ .
The Moon has a mass of $7.35 \times 10^{22} \, \text{kg}$ and a radiu5
(iii) Calculate the distance $x$ of point $X$ from the centre of the Moon.
$x = \underline{\hspace{5cm}} \text{ m } [3]$
[Total: 10]
© UCLES 2022 9702/41/M/J/22 [Turn over6
2 A sphere of mass $1.6 \times 10^{-10} \, \text{kg}$ has a charge of $+0.27 \, \text{nC}$ . The sphere is in a uniform electric field that acts vertically upwards, as shown in the side view in Fig. 2.1.
SIDE VIEW
electric field lines
sphere
plane in which sphere moves
Fig. 2.1
The force exerted on the sphere by the electric field causes the sphere to remain at a fixed vertical height in a horizontal plane.
There is a uniform magnetic field in the region of the electric field. The sphere moves at a speed of $0.78 \, \text{m} \, \text{s}^{-1}$ in the horizontal plane. The magnetic field causes the sphere to move in a circular path of radius 3.4 m, as shown in the view from above in Fig. 2.2.
VIEW FROM ABOVE
3.4 m
electric field lines out of the page
path of sphere
sphere
Fig7 (a) (i) Determine the direction of the uniform magnetic field. ................................................................................................................... [1] (ii) Explain why the motion of the sphere in the horizontal plane is circular. ................................................................................................................... ................................................................................................................... ................................................................................................................... [2] (b) Calculate the strength of the uniform electric field. electric field strength = ........................................... N C⁻¹ [2] (c) By considering the magnetic f
8
3 A fixed mass of an ideal gas is initially at a temperature of $17^\circ \text{C}$ .
The gas has a volume of $0.24 \, \text{m}^3$ and a pressure of $1.2 \times 10^5 \, \text{Pa}$ .
(a) (i) State what is meant by an ideal gas.
............................................................................................................................
............................................................................................................................
............................................................................................................................ [2]
(ii) Calculate the amount $n$ of gas.
$n = \underline{\hspace{5cm}} \, \text{mol} \, [2]$
(b) The gas undergoes three successive changes, as shown in Fig. 3.1.
 Show that the magnitude of the work done during the change AB is 19.2 kJ.
[2]
(ii) Complete Table 3.1 to show the work done on the gas, the thermal energy supplied to the gas and the increase in internal energy of the gas, for each of the changes AB, BC and CA.
Table 3.1
<table>
<tr>
<th>change</th>
<th>work done on gas/kJ</th>
<th>thermal energy supplied to gas/kJ</th>
<th>increase in internal energy of gas/kJ</th>
</tr>
<tr>
<td>AB</td>
<td></td>
<td>−48.0</td>
<td></td>
</tr>
<tr>
<td>BC</td>
<td></td>
<td></td>
<td></td>
</tr>
<tr>
<td>CA</td>
<td>−31.6</td>
<td></td>
<td></td>
</tr>
</table>
5
© UCLES 2022 9702/41/M/J/22 [Turn over10 4 A pendulum consists of a bob (small metal sphere) attached to the end of a piece of string. The other end of the string is attached to a fixed point. The bob oscillates with small oscillations about its equilibrium position, as shown in Fig. 4.1. <div style="text-align: center;">  <br> Fig. 4.1 (not to scale) </div> The length $L$ of the pendulum, measured from the fixed point to the centre of the bob, is 1.24 m. The acceleration $a$ of the bob varies with its displacement $x$ from the equilibrium position as shown in Fig. 4.2. <div style="text-align: center;">  <br> Fig. 4.2 </div> © UCLES 2022 9702/41/M/J/22
11
(a) State how Fig. 4.2 shows that the motion of the pendulum is simple harmonic.
...............................................................................................................................
...............................................................................................................................
............................................................................................................................... [2]
(b) (i) Use Fig. 4.2 to determine the angular frequency $\omega$ of the oscillations.
$\omega = \underline{\hspace{5cm}} \text{ rad s}^{-1}$ [2]
(ii) The angular frequency $\omega$ is related to the length $L$ of the pendulum by
$$
\omega = \sqrt{\frac{k}{L}}
$$
where $k$ is a constant.
Use your answer in (b)(i) to d12
5 Fig. 5.1 shows four diodes and a load resistor of resistance $1.2\,\mathrm{k}\Omega$ , connected in a circuit that is used to produce rectification of an alternating voltage.
<div style="text-align: center;">
<br/>
Fig. 5.1
</div>
(a) (i) State what is meant by rectification.
............................................................................................................................ [1]
(ii) State the type of rectification produced by the circuit in Fig. 5.1.
............................................................................................................................ [1]
(b) A sinusoidal alternating voltage $V_{\mathrm{IN}}$ is applied across the input terminals X and Y. The variation with time $t$ of $V_{\mathrm{IN}}$ 13
(ii) The magnitude of the output voltage $V_{OUT}$ varies with $t$ as shown in Fig. 5.2.
<div style="text-align: center;">
</div>
Fig. 5.2
On Fig. 5.2, label both of the axes with the correct scales. Use the space below for any working that you need.
[3]
(c) The output voltage in (b) is smoothed by adding a capacitor to the circuit in Fig. 5.1. The difference between the maximum and minimum values of the smoothed output voltage is 10% of the peak voltage.
(i) On Fig. 5.1, draw the circuit symbol for a capacitor showing the capacitor correctly connected into the circuit. [1]
(ii) On Fig. 5.2, sketch the variation with $t$ of the smoothed output voltage. [2]
(iii) Calculate the capacitance $C$ of the capacitor.
$$
C = \underline{\hspace{5cm}} \text{ F [3]14 6 (a) Define magnetic flux. ............................................................................................................................... ............................................................................................................................... ............................................................................................................................... [2] (b) A square coil of wire of side length 12 cm consists of 8 insulated turns. The coil is stationary in a uniform magnetic field. The plane of the coil is perpendicular to the magnetic field, as shown in Fig. 6.1. <div style="text-align: center;">  </div> Fig. 6.1 The flux density $B$ of the magnetic field varies with time $t$ as shown in Fig. 6.2.
15
(i) Determine the magnetic flux linkage inside the coil at time $t = 0.60\,\text{s}$ . Give a unit with your answer.
magnetic flux linkage = …………………………… unit ………… [3]
(ii) State how Fig. 6.2 shows that the electromotive force (e.m.f.) $E$ induced across the terminals between $t = 0$ and $t = 0.60\,\text{s}$ is constant.
……………………………………………………………………………………………………… [1]
(iii) Calculate the magnitude of $E$ .
$E = $ ………………………………………… V [2]
(c) The procedure in (b) is repeated, but this time the terminals of the coil are connected together. State and explain the effect on the coil of connecting the terminals together during the change of magnetic flux density shown in Fig. 6.2.
………………………………………………………………………………………………………
………………………………………………………………………………………………………
………………………………………………………………………………16
7 (a) State what is meant by a photon.
...............................................................................................................................
...............................................................................................................................
............................................................................................................................... [2]
(b) Electromagnetic radiation of a varying frequency $f$ and constant intensity $I$ is used to illuminate a metal surface. At certain frequencies, electrons are emitted from the surface of the metal. The variation with $f$ of the maximum kinetic energy $E_{\text{MAX}}$ of the emitted electrons is shown in Fig. 7.1.
Fig. 7.1
(i) State the 17 (ii) Describe three conclusions that can be drawn from the graph in Fig. 7.1. The conclusions may be qualitative or quantitative. 1 ....................................................................................................................... ....................................................................................................................... 2 ....................................................................................................................... ....................................................................................................................... 3 ....................................................................................................................... ......................................................
18
8 (a) (i) State what is meant by nuclear binding energy.
...............................................................................................................................
...............................................................................................................................
............................................................................................................................... [2]
(ii) On Fig. 8.1, sketch a line to show the variation with nucleon number $A$ of the binding energy per nucleon $E$ of a nucleus.
$\begin{array}{c}
E \\
\uparrow \\
0 \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad \quad 250 \\
\quad \quad \quad \quad \qua19
(c) Table 8.1 shows the masses of the particles involved in the reaction in (b).
Table 8.1
<table>
<tr>
<th>particle</th>
<th>mass/u</th>
</tr>
<tr>
<td> $^1_0n$ </td>
<td>1.008665</td>
</tr>
<tr>
<td> $^2_1H$ </td>
<td>2.014102</td>
</tr>
<tr>
<td> $^3_2He$ </td>
<td>3.016029</td>
</tr>
</table>
Calculate the energy released when 1.00 mol of deuterium undergoes the reaction.
energy = ………………………………………… J 5
© UCLES 2022 9702/41/M/J/22 [Turn over20 9 (a) (i) Explain how X-rays are produced for use in medical diagnosis. ............................................................................................................................... ............................................................................................................................... ............................................................................................................................... ............................................................................................................................... [3] (ii) State why X-ray images are taken of multiple sections of the body during computed tomography (CT) scanning. .........................................................................................
21 Determine, in terms of $I_0$, the intensity of the detected X-rays from: (i) point P detected intensity = ………………………………………… $I_0$ [2] (ii) point Q. detected intensity = ………………………………………… $I_0$ [2] (c) Explain, with reference to your answers in (b), whether the X-ray image of the structure in Fig. 9.1 has good contrast. ………………………………………………………………………………………………………… ………………………………………………………………………………………………………… ……………………………………………………………………………………………………… 1 © UCLES 2022 9702/41/M/J/22 [Turn over
22 10 (a) State Wien’s displacement law. ............................................................................................................................ [1] (b) Fig. 10.1 shows the wavelength distributions of electromagnetic radiation emitted by two stars A and B.  Fig. 10.1 The surface temperature of star A is known to be 5800 K. (i) Determine the surface temperature of star B. surface temperature = ................................................... K [2] © UCLES 2022 9702/41/M/J/22
23 (ii) Star B appears less bright than star A when viewed from the Earth. Use Fig. 10.1 to suggest, with a reason, how else the physical appearance of star B compares with that of star A. ............................................................................................................................... ............................................................................................................................... ............................................................................................................................... [2] (c) The lines in Fig. 10.1 have been corrected for redshift. (i) State what is meant by redshift. .....................................................................................................................