科目：物理 Physics (9702)
年份：2014 冬季
试卷：Paper 43
总页数：24
章节：12-13: Circular Motion & Gravitational Fields, 14-16: Temperature, Ideal Gases & Thermodynamics, 17: Oscillations, 18: Electric fields, 19: Capacitance, 20: Magnetic fields, 21: Alternating currents, 22: Quantum physics, 23: Nuclear physics, 24: Medical physics
4
## Section A
Answer all the questions in the spaces provided.
1. A light spring is suspended from a fixed point. A bar magnet is attached to the end of the spring, as shown in Fig. 1.1.
*Fig. 1.1*
In order to shield the magnet from draughts, a cardboard cup is placed around the magnet but does not touch it.
The magnet is displaced vertically and then released. The variation with time $t$ of the vertical displacement $y$ of the magnet is shown in Fig. 1.2.
*Fig. 1.2*
© UCLES 2014
9702/43/O/N/145
The mass of the magnet is $130\,\text{g}$ .
(a) For the oscillations of the magnet, use Fig. 1.2 to
(i) determine the angular frequency $\omega$ ,
$$
\omega = \underline{\hspace{5cm}}\,\text{rad}\,\text{s}^{-1}\ [2]
$$
(ii) show that the maximum kinetic energy of the oscillating magnet is $6.4\,\text{mJ}$ .
[2]
(b) The cardboard cup is now replaced with a cup made of aluminium foil. During 10 complete oscillations of the magnet, the amplitude of vibration is seen to decrease to $0.75\,\text{cm}$ from that shown in Fig. 1.2. The change in angular frequency is negligible.
(i) Use Faraday’s law of electromagnetic induction to explain why the amplitude of the oscillations decreases.
.....................................................................................................6
(ii) Show that the loss in energy of the oscillating magnet is $4.8 \, \text{mJ}$ .
[2]
(c) The mass of the aluminium cup in (b) is $6.2 \, \text{g}$ . The specific heat capacity of aluminium is $910 \, \text{J} \, \text{kg}^{-1} \, \text{K}^{-1}$ .
The energy in (b)(ii) is transferred to the cup as thermal energy.
Calculate the mean rise in temperature of the cup.
temperature rise = ………………………………………… K [2]
© UCLES 2014
9702/43/O/N/147 Please turn over for Question 2. © UCLES 2014 9702/43/O/N/14 [Turn over
8
2 (a) On the axes of Fig. 2.1, sketch the variation with distance from a point mass of the gravitational field strength due to the mass.
<div style="text-align: center;">
</div>
Fig. 2.1
[2]
(b) On the axes of Fig. 2.2, sketch the variation with speed of the magnitude of the force on a charged particle moving at right-angles to a uniform magnetic field.
<div style="text-align: center;">
</div>
Fig. 2.2
[2]
© UCLES 2014
9702/43/O/N/149 (c) On the axes of Fig. 2.3, sketch the variation with time of the power dissipated in a resistor by a sinusoidal alternating current during two cycles of the current. <div style="text-align: center;">  </div> Fig. 2.3 [3] © UCLES 2014 9702/43/O/N/14 [Turn over
10
3 A fixed mass of gas has an initial volume of $5.00 \times 10^{-4} \, \text{m}^3$ at a pressure of $2.40 \times 10^5 \, \text{Pa}$ and a temperature of $288 \, \text{K}$ . It is heated at constant pressure so that, in its final state, the volume is $14.5 \times 10^{-4} \, \text{m}^3$ at a temperature of $835 \, \text{K}$ , as illustrated in Fig. 3.1.
<table>
<tr>
<th>initial state</th>
<th>final state</th>
</tr>
<tr>
<td>
$5.00 \times 10^{-4} \, \text{m}^3$ <br>
$2.40 \times 10^5 \, \text{Pa}$ <br>
$288 \, \text{K}$
</td>
<td>
$14.5 \times 10^{-4} \, \text{m}^3$ <br>
$2.40 \times 10^5 \, \text{Pa}$ <br>
$835 \, \text{K}$
</td>
</tr>
</table>
Fig. 3.1
(a) Show that these two states provide evidence that the gas beha11 (ii) the change in internal energy of the gas. State whether the change is an increase or a decrease in internal energy. change in internal energy = ………………………………………… J ……………………………………………………………………………… [2] © UCLES 2014 9702/43/O/N/14 [Turn over
12 4 (a) State what is meant by *simple harmonic motion*. ............................................................................................................................... ............................................................................................................................... ............................................................................................................................... [2] (b) A trolley is attached to two extended springs, as shown in Fig. 4.1.  Fig. 4.1 The trolley is displaced along the line joining the two springs and is then released. At one point in the motion, a stopwatch is started. The variation with time $t$ of the velocity $v$ of the trolley is shown in Fig. 4.2.  The amplitude of vibration of the trolley is $3.2 \, \text{cm}$ .
Determine
1. the maximum speed $v_0$ of the trolley,
$$
v_0 = \underline{\hspace{5cm}} \, \text{cm} \, \text{s}^{-1} \quad [3]
$$
2. the displacement of the trolley for a speed of $\frac{1}{2} v_0$ .
displacement $= \underline{\hspace{5cm}} \, \text{cm} \quad [2]$
(c) Use your answers in (b) to sketch, on the axes of Fig. 4.3, a graph to show the variation with displacement $x$ of the velocity $v$ of the trolley.
<div style="text-align: center;">
</div>
Fig. 4.3
2 UCLES 2014 9702/43/O/N/14 [Turn over14 5 (a) Define *electric potential* at a point. ............................................................................................................................... ............................................................................................................................... ............................................................................................................................... [2] (b) An isolated metal sphere is charged to a potential $V$ . The charge on the sphere is $q$ . The charge on the sphere may be considered to act as a point charge at the centre of the sphere. The variation with potential $V$ of the charge $q$ on the sphere is shown in Fig. 5.1.  Fig. 5.1 Use Fig. 5.1 to determine (i) the radius
15
(ii) the energy required to increase the potential of the sphere from zero to $24\,\text{kV}$ .
$$
\text{energy} = \underline{\hspace{5cm}}\,\text{J [3]}
$$
(c) The sphere in (b) discharges by causing sparks when the electric field strength at the surface of the sphere is greater than $2.0 \times 10^6\,\text{V}\,\text{m}^{-1}$ .
Use your answer in (b)(i) to calculate the maximum potential to which the sphere can be charged.
$$
\text{potential} = \underline{\hspace{5cm}}\,\text{V [3]}
$$
© UCLES 2014 9702/43/O/N/14 [Turn over16
6 Three capacitors, each of capacitance $48\,\mu\mathrm{F}$ , are connected as shown in Fig. 6.1.
Fig. 6.1
(a) Calculate the total capacitance between points A and B.
$$
\text{capacitance} = \underline{\hspace{5cm}}\,\mu\mathrm{F}\ [2]
$$
(b) The maximum safe potential difference that can be applied across any one capacitor is 6 V.
Determine the maximum safe potential difference that can be applied between points A and B.
$$
\text{potential difference} = \underline{\hspace{5cm}}\,\mathrm{V}\ [2]
$$
© UCLES 2014 9702/43/O/N/1417
7 (a) State what is meant by *quantisation* of charge.
...............................................................................................................................
............................................................................................................................... [1]
(b) Charged parallel plates, as shown in Fig. 7.1, produce a uniform electric field between the plates.
|
+-------------------
beam of
protons → -------------------------------
|
-
```
Fig. 7.1
The electric field outside the region between the plates is zero.
A uniform magnetic field is applied in the region between the plates so that a beam of protons passes undeviated between the plates.
(i) State and explain the direction of 18
8 (a) State what is meant by a photon.
...............................................................................................................................
...............................................................................................................................
............................................................................................................................... [2]
(b) A beam of light is incident normally on a metal surface, as illustrated in Fig. 8.1.
Fig. 8.1
The beam of light has cross-sectional area $1.3 \times 10^{-5} \, \text{m}^2$ and power $2.7 \times 10^{-3} \, \text{W}$ .
The light has wavelength 570 nm.
The light energy is absorbed by the metal and no light is reflected.
(i) Show that19 (ii) Calculate, for a time of 1.0 s, 1. the number of photons incident on the surface, number = ………………………………………… [2] 2. the change in momentum of the photons. change in momentum = …………………………… kg m s⁻¹ [3] (c) Use your answer in (b)(ii) to calculate the pressure that the light exerts on the metal surface. pressure = ……………………………………… Pa [2] © UCLES 2014 9702/43/O/N/14 [Turn over
20
9 During the de-commissioning of a nuclear reactor, a mass of $2.5 \times 10^6$ kg of steel is found to be contaminated with radioactive nickel-63 ( $^{63}_{28}\text{Ni}$ ). The total activity of the steel due to the nickel-63 contamination is $1.7 \times 10^{14}$ Bq.
(a) Calculate the activity per unit mass of the steel.
activity per unit mass = ………………………………………… Bq kg⁻¹ [1]
(b) Special storage precautions need to be taken when the activity per unit mass due to contamination exceeds $400$ Bq kg⁻¹. Nickel-63 is a β-emitter with a half-life of 92 years. The maximum energy of an emitted β-particle is 0.067 MeV.
(i) Use your answer in (a) to calculate the energy, in J, released per second in a mass of 1.0 kg of steel due to the radioactive decay of the nickel.
energy = ………………………………………21 (iii) Use your answer in (a) to determine the time interval before special storage precautions for the steel are not required. time = ………………………………… years [3] © UCLES 2014 9702/43/O/N/14 [Turn over
22
Section B
Answer all the questions in the spaces provided.
10 An electronic sensor may be represented by the block diagram of Fig. 10.1.
<div style="text-align: center;">
<table>
<tr>
<td>sensing device</td>
<td>→</td>
<td>processing unit</td>
<td>→</td>
<td>output device</td>
</tr>
</table>
</div>
Fig. 10.1
(a) State suitable sensing devices, one in each case, for the detection of
(i) change of temperature,
................................................................................................................... [1]
(ii) pressure changes in a sound wave.
................................................................................................................... [1]
(b) The ideal operational amplifier (op-amp) shown in23
(ii) A sensing device produces a variable potential $V_{IN}$ .
The variation with time $t$ of $V_{IN}$ is shown in Fig. 10.3.
Fig. 10.3
On the axes of Fig. 10.3, sketch the variation with time $t$ of the output potential $V_{OUT}$ . [3]
© UCLES 2014 9702/43/O/N/14 [Turn over24 11 (a) By reference to ultrasound waves, state what is meant by the *specific acoustic impedance* of a medium. ............................................................................................................................... ............................................................................................................................... ............................................................................................................................... [2] (b) A parallel beam of ultrasound of intensity $I$ is incident normally on a muscle of thickness 3.4 cm, as shown in Fig. 11.1.  Fig. 11.1 The ultrasound wave is reflected at a muscle-bone boundary. The intensity of the ultrasound received back at the transducer is $I_
25
(i) The intensity reflection coefficient $\alpha$ for two media having specific acoustic impedances $Z_1$ and $Z_2$ is given by
$$
\alpha = \frac{(Z_1 - Z_2)^2}{(Z_1 + Z_2)^2}.
$$
Calculate the fraction of the ultrasound intensity that is reflected at the muscle-bone boundary.
fraction = ………………………………………… [2]
(ii) Calculate the fraction of the ultrasound intensity that is transmitted through a thickness of 3.4 cm of muscle.
fraction = ………………………………………… [3]
(iii) Use your answers in (i) and (ii) to determine the ratio $\frac{I_R}{I}$ .
ratio = ………………………………………… [2]
© UCLES 2014 9702/43/O/N/14 [Turn over26 12 (a) Distinguish between an *analogue* signal and a *digital* signal. analogue signal: ............................................................................................................... ............................................................................................................ digital signal: ............................................................................................................... ............................................................................................................... [2] (b) An analogue-to-digital converter (ADC) converts whole decimal numbers between 0 and 23 into digital numbers. State (i) the minimum number of bits in each digital number, number of bits = ..........................................
27 13 In a mobile phone system, the country is divided into a number of cells, each with its own base station. State and explain (a) why the country is divided into cells, ............................................................................................................................... ............................................................................................................................... ............................................................................................................................... [2] (b) two reasons why the base stations operate on UHF frequencies. 1. ............................................................................................................................... ..................................